**•How To Make Skyrim Run Better On PS3!•**
Tired of the game-breaking lag with your 20meg Skyrim save files? Here is a guide to help prevent these issues:
1) "Deleting Excess Save Files"
•Go to "Save Data Utility" on the XMB & check how many Skyrim saves tu have. If tu have más then three, borrar them. tu must only have three saves maximum. Also make sure to borrar any "Auto-Saves."
2) "Freeing Up HDD Space"
•Check how many GBs tu have left on your console. Go to "Settings," "System Setting" & then open "System Information." It will mostrar tu how many GBs tu have used and how much el espacio tu have left. e.g: 233/320GB. The number on the left will mostrar how many GBs tu have left. If tu don't have much, scroll across the XMB to "Game Data Utility" and borrar any game's data that tu aren't playing anymore/lately. Don't worry, Game data is only "install data," when tu decide to play the game again tu will just have to install again and your saves will not be affected. If tu also want to copy & borrar game saves, scroll down from "Game Data Utility" and select "Save Data Utility." If tu have important saves, don't worry about them. Saves take up hardly any el espacio compared to "Game Data." If tu want to free-up as much el espacio as possible, tu can plug a USB into the PS3 and copy "non-copy-protected" saves to your thumb drive. That way tu can borrar them off of tu system and just copy them back from the USB when tu want to play them again. #NOTE# tu can copy some "Game Data Utility" as well as "Save Data Utility" if tu want to do both. Make sure tu have as much el espacio as possible because Skyrim needs quite a bit of HDD el espacio to run properly. My Skyrim Game Data is about 4-5 GBs.
2) Tweaking "Game & Display Settings"
•Sometimes "Graphical Enhancement" settings can interfere with gameplay performance such as frame-rate dips, glitches & lag in massive games like Skyrim. (Don't worry, tu will be changing these settings back later!)
#Temporarily Disable The Following:
*Go to "Game Settings" and turn "PS Smoothing" to "Off."
*Scroll down to "Display Settings" and disable/limit all the HDMI Features:
- Super White
- RGB Range to "Limited."
- Cross-Colour Reduction Filter
- Deep Colour Output
3) "Permanently Disabling All In-Game Auto Saves & Testing Performance"
•After you've put all of the ^ *above settings to either "off" o "limited," insert your Skyrim disc and load it up.
Once the game has loaded, go to setting and disable all Auto-Saves listed below (if tu haven't already.)
*Save on Wait
*Save on Fast Travel
*Save on Rest
*Save on Character Menu
^ *This will prevent in-game stuttering when your system forces your game to save automatically. It may also decrease cargando... times significantly as well as preventing auto-save files from filling up your load & save menus.
4) "System Restart & Re-Enabling Settings"
•When you've disabled all of the "Auto-Save" options, exit the menu and test how your game is running. Is it good, OK, annoying o terribly unplayable? Most likely it'll either be worse o a even a tiny bit better than it was before tu changed the settings. If it's at least a little better, it'll probably still be, well...BAD!
Don't worry! A system restart and another change of settings should fix that right up!
*Quit the game and turn the PS3 off then on again.
*When the PS3 has turned on again, go to back to "Game" and "Display Settings" to re-enable the settings tu disabled.
#NOTE# After this tu can restart the system again if tu want to. tu do not have to.
With your re-enabled "Graphic Settings," load up Skyrim again and enjoy the (at least temporary) smoother, consistent frame-rate & a lot less lag! ;) *^_^*
This articulo is by:
~*•Žÿłįçę*•~
Tired of the game-breaking lag with your 20meg Skyrim save files? Here is a guide to help prevent these issues:
1) "Deleting Excess Save Files"
•Go to "Save Data Utility" on the XMB & check how many Skyrim saves tu have. If tu have más then three, borrar them. tu must only have three saves maximum. Also make sure to borrar any "Auto-Saves."
2) "Freeing Up HDD Space"
•Check how many GBs tu have left on your console. Go to "Settings," "System Setting" & then open "System Information." It will mostrar tu how many GBs tu have used and how much el espacio tu have left. e.g: 233/320GB. The number on the left will mostrar how many GBs tu have left. If tu don't have much, scroll across the XMB to "Game Data Utility" and borrar any game's data that tu aren't playing anymore/lately. Don't worry, Game data is only "install data," when tu decide to play the game again tu will just have to install again and your saves will not be affected. If tu also want to copy & borrar game saves, scroll down from "Game Data Utility" and select "Save Data Utility." If tu have important saves, don't worry about them. Saves take up hardly any el espacio compared to "Game Data." If tu want to free-up as much el espacio as possible, tu can plug a USB into the PS3 and copy "non-copy-protected" saves to your thumb drive. That way tu can borrar them off of tu system and just copy them back from the USB when tu want to play them again. #NOTE# tu can copy some "Game Data Utility" as well as "Save Data Utility" if tu want to do both. Make sure tu have as much el espacio as possible because Skyrim needs quite a bit of HDD el espacio to run properly. My Skyrim Game Data is about 4-5 GBs.
2) Tweaking "Game & Display Settings"
•Sometimes "Graphical Enhancement" settings can interfere with gameplay performance such as frame-rate dips, glitches & lag in massive games like Skyrim. (Don't worry, tu will be changing these settings back later!)
#Temporarily Disable The Following:
*Go to "Game Settings" and turn "PS Smoothing" to "Off."
*Scroll down to "Display Settings" and disable/limit all the HDMI Features:
- Super White
- RGB Range to "Limited."
- Cross-Colour Reduction Filter
- Deep Colour Output
3) "Permanently Disabling All In-Game Auto Saves & Testing Performance"
•After you've put all of the ^ *above settings to either "off" o "limited," insert your Skyrim disc and load it up.
Once the game has loaded, go to setting and disable all Auto-Saves listed below (if tu haven't already.)
*Save on Wait
*Save on Fast Travel
*Save on Rest
*Save on Character Menu
^ *This will prevent in-game stuttering when your system forces your game to save automatically. It may also decrease cargando... times significantly as well as preventing auto-save files from filling up your load & save menus.
4) "System Restart & Re-Enabling Settings"
•When you've disabled all of the "Auto-Save" options, exit the menu and test how your game is running. Is it good, OK, annoying o terribly unplayable? Most likely it'll either be worse o a even a tiny bit better than it was before tu changed the settings. If it's at least a little better, it'll probably still be, well...BAD!
Don't worry! A system restart and another change of settings should fix that right up!
*Quit the game and turn the PS3 off then on again.
*When the PS3 has turned on again, go to back to "Game" and "Display Settings" to re-enable the settings tu disabled.
#NOTE# After this tu can restart the system again if tu want to. tu do not have to.
With your re-enabled "Graphic Settings," load up Skyrim again and enjoy the (at least temporary) smoother, consistent frame-rate & a lot less lag! ;) *^_^*
This articulo is by:
~*•Žÿłįçę*•~
