I haven't updated my MacBook Pro in many years. In fact, I'm still on Snow Leopard (MacOS X 10.6.8). This is a version so old that all the steps I read to make a bootable USB drive failed. I wasn't able to use createinstallmedia to make a boot disk because that doesn't work until MacOS X 10.7. Nearly all the steps I read online regarding using "Disk Utility" to make a bootable USB drive failed until did the following steps:

1. link.

2. After downloading, it will automatically launch the upgrade installer. Quit with Command+Q.

3. Go to "Applications/Install OS X El Capitan" and Control+Click to mostrar the context menu and select "Show Package Contents".

4. Open "Contents" and then "Shared Support" and copy the "InstallESD.dmg" file to the Desktop. (Drag to the desktop.)

5. After the copy is complete, double click on "InstallESD.dmg" to mount the volume. It should mount as "OS X Install ESD".

6. This is where most instructions seem to stray off the correct path. There is actually a hidden file called "BaseSystem.dmg" in the root directory of the "OS X Install ESD" volume that was just mounted. To mostrar the hidden file, tu can change the system settings to mostrar all hidden files o just open it using the Terminal which is what I did. Run "Application/Utilities/Terminal" and type at the prompt:
open /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg
This opens the hidden "BaseSystem.dmg" file and mounts it as "OS X Base System".


6. Plug in your USB device that is larger than 8 GB that you'll be making bootable and putting the El Capitan installer on. You'll want to copy any data tu want to save off of it at this point. I used a brand new SD Card (plugged into a USB adapter), so I didn't have anything to backup.

7. Run "Applications/Utilities/Disk Utility" and tu should see "InstallESD.dmg" with "OS X Install ESD" volume and "BaseSystem.dmg" with "OS X Base System" volume in the left sidebar. tu should also see the USB device tu have plugged in. Click on the USB device and select the "Erase" tab. Choose "Mac OS Extended (Journaled)" and click on "Erase...". confirmar tu want to erase the USB device and type in your admin contraseña if prompted. I think this step might not be necessary, but it's part of what I did.


8. Once the erased, click on the Restore tab and drag "OS X Base System" into the fuente field. Then Drag the newly erased volume of your USB device into the Destination field. Click Restore. (Type your admin contraseña if prompted.)


9. After the "OS X Base System" has been copied onto the USB device, go ahead and eject the BaseSystem.dmg drive. Ejecting is a good idea because there are now two volumes named "OS X Base System" and we don't need the one in BaseSystem.dmg anymore.


10. Open the USB drive's volume (which has been automatically renamed to "OS X Base System"). Go to "System/Installation" in that volume and tu should see a "Packages" alias file. borrar the "Packages" alias; we'll be replacing it with a copy of the actual Packages folder.


11. Open the "OS X Install ESD" volume (the one from the InstallESD.dmg file copied to the desktop) and there should be a folder called "Packages". Drag the "Packages" folder over to the "Installation" folder of the USB drive to copy it.


12. There are also two hidden files that need to be copied from "OS X Install ESD" (from InstallESD.dmg) to the root directory of "OS X Base System" (the USB drive). To mostrar hidden files, open a Terminal to issue a command to mostrar all files including hidden ones and to stop all existing Finder windows (new ones will heed the setting). To do this, open a Terminal and type:
defaults write com.apple.finder AppleShowAllFiles TRUE
killall Finder


13. Now Finder windows should mostrar the hidden files. Copy both "BaseSystem.chunklist" and "BaseSystem.dmg" from "OS X Install ESD" partition over to the "OS X Base System" partition (the USB drive).


14. For cleanliness, hide the hidden files again por typing in a Terminal:
defaults write com.apple.finder AppleShowAllFiles FALSE
killall Finder

15. After the copy of "Packages", "BaseSystem.chunklist", and "BaseSystem.dmg" is complete, tu should have a bootable USB drive that can install El Capitan on a Snow Leopard machine. Just restart and hold down Option as soon as the screen turns black and don't let go until the boot loader screen appears. tu should be able to choose the USB drive volume to boot from. If tu don't see the drive, tu might need to press Option+Shift+Command+. (Period) to force load Option ROM firmware code.